Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I spent most of the week end working on the welder/generator. Turns out that the starter solenoid was bad. replaced the solenoid and engine cranks. Had no spark so replaced points, condenser, cap, rotor, coil, wires and plugs and the engine fired right up. Thanks to everyone who helped me...
I cleaned all conections, checked the ground, installed new deep cycle battery and still just clicks. It clicks at the starter and at that shiny thing with the tube on it. I did take power directly to the starter and it did engage and turn the engine over, so not the starter.(thanks for that...
Thanks all for your input. Manuals will be very helpful. I see now how the unit pulls out on the rail system. I removed the spark plugs and every thing looks good inside the cylinders I then pulled the panel in the passenger side front compartment and removed the shroud around the flywheel and...
Just picked up a M1031 Contact truck with a G204 Hobart Welder. Tried to start the Wisconsin engine of the welder and the starter just clicks. Thinking it has a bad starter. Dose anyone no how to get at the starter for removal? It is located on the back of the engine up against the front wall of...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!