Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
So I did sell my M35A3. Now I’m torn I see a nice A2 and I’m looking at a M813A1. I’m not sure which angle to go. If I go 5 ton way I can’t ask you guys questions on this forum have to find a 5 ton one. Which by the way you guys were extremely helpful with any questions or problems I had thank...
I got a question I can’t seem to find the info hoping you guys can help. Do the M35A2 and M813A1 use the same frame with the 813 being heavier. Looking to replace my A3 with one of these thank you
So after attempting to loosen my tranny dipstick tube from the pan that was extremely tight I thought it’s not leaking now so I’m not going to make it start. So I decided to leave well enough alone. And filled up what I drained out and called it good. And replaced my fuel filter couldn’t find a...
If I don’t have to remove the pan that will make things easier. But I already bought a filter more like a screen looks like the old popcorn aluminum you put on the stove only flat with a o-ring with a new gasket
I started the tranny flush this evening on my A3 with help of my wife she drove it in between drains. I did total of 5 not sure what was in there before but it smelled like burning brakes. I changed the external filter now I need to remove the pan to change that filter and that looks like fun...
Hello can anybody tell me if this is for a military truck? My Wife’s friends parents sold their Deuce and found this later and gave it to me said it was for their deuce jack handle. I don’t know I never seen a military jack for a deuce so I don’t know just curious thank you
No generator just trailer. We have a little generator that will power the house or certain items depending on time of season. Im not sure if she would go for a big generator. But I keep looking at the auction for them.
We picked it up with a 3/4 ton ram long bed magnet lights it towed nice once you find happy speed didn’t push or anything just drive normally you be good
I added a Flat deck trailer XM 1061 E1 to my fleet thanks to a wonderful gentleman in NY thank you Zebedee. It was a long and bouncy ride 7 hr ride back to PA but we made it
I just now drained all my diff fluids and transfer case except for the front diff the plug is stripped so I’m leaving it alone I put my finger in the fill hole it came out yellowish oil figured it was full. I’m sure I can chisel the plug out but I’m not to concerned about that now I have to...
It wasn’t that hard to install I removed the 2 back corner gusset bolts reamed hole to 1/2”, then put hitch in place bolted both corners down tight that gave me my location to drill my other holes. The ones most forward the front came up under the cross member from the pintle to frame I removed...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!