Search results

Actually, I'd try a local parts house, then George at VTCS, then Saturn, then Memphis, in that order. Your local parts shop may be a little more expensive than the mail order specialty houses, but usually quicker to get the parts and easier to exchange if there is a problem. But almost all...

NAPA is nice, have lots of parts, but prices are outrageous. If the part you want at NAPA isn't 150% of what you can buy it for locally, then it is 200 % of the local price. That being said, most bearings, cups and cones have a part number stamped or engraved on them. Look real close and you...

Ryan - I thought I had recalled reading somewhere that the inner and outer cones were identical in diameter and width, the only difference being the bore size. That is what I stated in my original post and ended up getting blown out of the water. The 3290 cup fits both the 392 cone and the 3994...

OK, I admit it, I was wrong in my earlier post in this thread about wheel bearing sizes. The inner and outer wheel bearings are the same outside diameter, but the inner bearing is thicker than the outer bearing and has a larger bore diameter to fit over the step in the spindle. Interestingly...

The inner and outer bearings should be identical in size except for the inner bore diameter. The inner bearing has a larger bore diameter to fit over the step in the spindle. The OD and width are the same inner and outer, and the cups are the same for both. If your wheel bearings are not the...