Search results

No problem Ive done a lot of searching and digging to the point my head is spinning. I originally was just going to size up a freeze plug to install for under a $1 and like you I cant imagine there being much pressure on the lube side back there so id think a freeze plug would be just fine. I...

I found the GM part number for the lube orifice cup plug. For the solid plug for the 4x4 housing without the orifice you want GM part number 9427692. For the guys wanting to convert the other way and convert a 4x4 transmission into a 2wd and wanting the orifice hole in their plug for the 2wd...

I had a guy on another forum that's done the 2wd to 4wd conversion tell me to make sure to plug the drain hole in the rear housing also. He said he popped out the plug with the hole and took it up to the local parts store and sized it up to some freeze plugs until he found one close to size to...

brazengoat06 I am also doing the swap as we speak in my cucv and also have a 2wd 4l80e transmission. My output shaft is the 6.5in fully splined so I plan to cut my shaft down to length rather then tearing it down to replace it with a 4x4 output shaft. I plan to run my 208 and see about having...