Search results

Thanks to Bjorn for letting me in on the placement of the Horn CB. After checking for power there I found nothing again. I then traced the wire bundle back toward the magnetic solenoid and found that the 10 wire had rubbed against the engine lift bracket until it cut it in two. A couple of the...

The power went out after using the horn so that makes a lot of sense. Thanks for the location of the Horn CB as it seems power is going toward the accessory switch and lamp switch but there is no power at either connection and this and the heater seem to be the only connections between the mag...

Jeff, The batteries are fully charged. They are not being drawn down. The problem is I can't get a current draw. There is no power going to the master switch to energize the magnetic solenoid. I need to track down to see where the break is that is not allowing the master switch to get power...

Jeff, All cables and clamps are fine. The main switch is not getting any power and it went from starting fine to no electrical power inside of 4 minutes. It is not a bad battery problem or a cable or connection problem near the batteries. Even the connection at the starter is just fine. I...

The other day while driving I noticed all electrical power went out. I get good voltage at the batteries and at the starter. I also get power to the magnetic solenoid. No power to the main power switch though. The schematic has me a little confused. Looking at it I think the wires 10 or 11...