Search results

Yes, electrical current going from pin7 to pin1.

It is good. It runs from pin 7 to 1 which is the way my other was set-up.

I charged the batteries with a GEL battery approved charger and they are now sitting at 13.5 volts each and still have the same issue with the fuel solenoid. Now voltage drops from 27 volts to 22 volts when starting. I've got a brand new S1 switch so I may trade them out to see if that is the...

S1 is blue plastic square type. Input into the switch is 24 volts but at startup goes to around 20 volts. Per the TM I disconnected the starter solenoid power supply and I still had voltage drop to 20volts when the master switch was turned to start. Could the switch be the problem? I think I...

They are new optima with 12.46 volts per battery. I've had that happen before where the batteries would be low and the fuel solenoid would retract and not stay but it would pulsate weird and barely crank. For some reason, I can hold the solenoid back while cranking and after it starts, it will...

Tested the mag pick up and it was perfect. Then I used the TM to test the fuel solenoid and it's not holding correctly. But the solenoid worked correctly in another unit when I first got it, which was about a year ago. I've got to replace the motor so I've been pulling parts on it so I can not...

Oh yeah, this is not my first rodeo. LOL! No matter how long you hold it, the fuel solenoid will retract normally and will try to start but soon as the starter disengages the fuel cutoff will go back to the off position. It's weird, I'm going to perform the magnetic pickup adjustment tomorrow...

I've put in new relay's thinking the same thing. I was thinking about the mag pick up but wanted some advice before moving forward. No fault lights.

I have an update to why the fuel cut off solenoid is missing. I pulled one off another unit to just test everything and it shuts the unit off before it can start. When starting, it will retract (as normal), then as soon as the starter disengages it extracts and shuts the unit down. Now, I can...

Thanks guys! I been trying Delks but William keeps putting me off. I've called a couple of times and he tells me he'll have to look and call me back. Of course he never calls me back. It's real disappointing because I use to buy all my parts from him but he did this to me about a month ago so I...

Anyone have a source for the fuel cutoff solenoid on the 802a or 803a? I'm missing the solenoid and linkage.