Search results

Attached is an excellent write up on the rebuild of the speed switch. MEP 005a/004a Speed switch tear down and repair (mechanical version) https://www.steelsoldiers.com/showthread.php?183163-MEP-005a-004a-Speed-switch-tear-down-and-repair-(mechanical-version)&p=2174010#post2174010

Guy, you're right again! I double checked all the relays and resistors in the special relay box and reinstalled. Still no start. Took the speed control harness off and jumped AB, started right up. So I took the speed switch apart last night and found the housing was to far apart so the reset...

Yes, 100% sure. Load tested each battery. Can also jump the starter and the it starts right up.

Ok so I put the relay back in and install the special relay box. Now the fault indicator lights work but still no start.

Thanks Guy, I'll put back in tomorrow and give an update.

I should mention, that I can hit the battle short on and the fuel pumps activate, then when I go to run on the start switch, the fuel pumps activate and the gauges move into position, so I'm getting power. Guy I did reset CB1 thinking the same thing. So I pulled the special relay box and I...

Just got in a mint 004a with 27 hours after a tier 2 reset in 2006. Everything worked perfect, then one of my guys was power washing the bottom of the set, under the motor and accidentally touched the positive cable on the starter to ground with the metal power washer hose. Now I have no start...