Search results

There is an ambac injector pump manual on the sight that shows the way to check timing. Basically you take the valve cover off number 1 cylinder. Then rotate the motor until you see the intake valve open then close, then look in the sight hole for the flywheel until you see PC; turn until your...

It sounds like the plunger guide may be cracked or striped and letting the guide get out 180 degrees. Ive had a couple that would run good, then on another startup run like crap and make the head super hot like yours. Temperatures would be almosy 400 degrees with no load. Sometimes the guide...

When going to start, you should get 24v to 11-13-15 and 25-27-28. 13 is attached to 14. I would recommend taking 1 wire off at a time to see if the short is in the switch or in one of the circuits

Yes look at the manual and it will tell you which numbers have power at differwnt positions. Just take a multimeter to check voltage

Really sounds like the master switch. Do the panel lights still work when nothing else will?