Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
well i had to use
- upper and lower intake
- passenger exhaust manifold
-6.5 injectors (there shorter, and will clear the manifold better)
- turbo
- homemade wastegate controller
-and i turned up the injection pump 1/4 turn + a "tad" more
i then had a exhaust shop build me a crossover pipe...
as i said, anything over 1 turbo is out of my knowage area.. lol (other then detroits, then i know alittle, but not much) everything i know is from months, and months of reading, and research... then by experameanting.. i turboed my M1009 and ran 10psi on a stock engine.. then i got my 1995 Z71...
a lot of detroits use turbo over superchargers.. it needs the boost from the supercharger at idle and low RPM's just to run, then the turbo kicks in about mid-range when the supercharger "falls off"
when you start talking "twins" and "supercharging" in the same sentence, you going beyond my experance.. lol i do know from when i built my 6.5 that you dont have much option when it comes to injectors.. you have stock NON-turbo, stock turbo, and marine "40hp" injectors.. if you use a twin...
you can get the optimizer block, i just cant remember where.. but if it were me, i would use the P400 block (used in the new up-armored HMMWV's) they will work in the CUCV's with a small lift to clear the oil pan.. with that block i would add
- .010 thicker head gaskets
- HX35 turbo, wastegated...