• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. K

    MEP-831a will not start.

    It's at the back of TM 9-6115-639-13&P
  2. K

    MEP-831a will not start.

  3. K

    MEP-831a will not start.

    Also try reconnecting the white plug in the wires to the actuator. Then start it normally. When running the LED in the righthand relay in the control cube should be illuminated. Then move the master switch S1 to OFF. The LED in the right hand relay should go out. Does it?
  4. K

    MEP-831a will not start.

    Suggestion.. Disconnect the white connector in the two wires going to the actuator on the engine. Lift the actuator off the magnet. Pull start the engine using the compression relief. The engine should run at a relatively low RPM. If it's running at a high RPM then there is an issue with the...
  5. K

    MEP-831a will not start.

    +24 volts takes a long path thru multiple wires to get to S1-5. You ought to trace the power path from the battery's positive terminal thru all the points along it's path to S1-5. Here are the step by step points that it get there from the battery's positive terminal Battery + goes to Starter...
108,530members
163,792threads
2,304,342posts
787online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks