Search results

No. In the current firmware build the controller defaults to the Aux Fuel pump to be OFF at each start regardless if it is started via WiFi or 2-Wire. To enable the Aux Fuel pump the gui must be used to enable the Aux Fuel pump after each start. This is to prevent the Aux Fuel pump from...

One of the two wires is tied to +24 volts thru a 3.3K 1/2W resistor. So yes, one could monitor the sets battery voltage by measuring the voltage on that wire to determine the sets battery voltage to trigger a restart if the sets batteries voltage gets low. The second wire is connected to a 430...

Thank you! It certainly was a lot of work both hardware wise and the firmware development of the 4,800 lines of code that run it. The Beta testers from S.S. who's feedback and feature suggestions help shape the final product. Unfortunately there were at least 3 variants of the S1 switch...

The firmware, as designed, does not automatically start the generator for the purpose of charging he generators batteries when they eventually start to drop in voltage. The battery voltage can be monitored via WiFi when the generator is off to determine when the batteries might need topping...