• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. K

    MEP 831 not getting over 150 volts

    Increase the gap slightly more than 5/16"
  2. K

    MEP 831 not getting over 150 volts

    Correction, hadn't had my coffee yet... With the set OFF check the position of the 120/240 switch under the inverters clear cover. Might want to toggle it a few times and then leave it in the 120/240 position. Then... Remove the 4 screws holding the red safety cover over the inverters output...
  3. K

    MEP 831 not getting over 150 volts

    Is the throttle linkage adjusted per the TM such that the gap between the magnet and the target is 5/16" at no load? Can you measure the voltage at the lugs from L1 to Neutral and then from L2 to Neutral and let us know what you read?
108,496members
163,760threads
2,303,961posts
1,084online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks