• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    Swapped engine, wont start, HOT battery terminals

    Took a lot of short trips but the truck is finaly running. The lift pump was installed incorrectly. Took forever to get that push rod to stay up and get the pump in. Fit like a glove once it was in. Why on earth would anyone put something in such an awefull spot... The check valve on the...
  2. K

    Swapped engine, wont start, HOT battery terminals

    I had to quit for the day and get the truck moved out of the way of shop opperations. Before I did I decided to check one last time if there is fuel actually flowing at the filter while cranking and it is not. I had fuel at the filter due to pressurizing the tank, but did not double check...
  3. K

    Swapped engine, wont start, HOT battery terminals

    Also nothing coming out of the tube on top of the IP. had a buddy put a finger over it to see if any air was being pushed out.
  4. K

    Swapped engine, wont start, HOT battery terminals

    the IP from the old motor is still on the old motor. The new motor has its original IP on it still. I was to understand it was test run before it was shipped. I have 12v power at the pink and both green wires going to the IP. I took these clips apart and gave the a good once over with 400...
  5. K

    Swapped engine, wont start, HOT battery terminals

    5 more rounds of cranking and still nothing at the cylinder. Trying a few more times then setting the batteries on a charger and getting lunch.
  6. K

    Swapped engine, wont start, HOT battery terminals

    Figured out the fuel tank pressure. I have fuel at the filter now. Probably saved a significant amount of time there. 1 more 10sec cranking interval still no fuel at the glow plug holes. Gonna let it rest and go for round 3.
  7. K

    Swapped engine, wont start, HOT battery terminals

    Making sure to give it 5mins between cranking while replying here. I had to replace the fuel lift pump unfortunately. It was the one thing that got damaged while putting the motor back in. the nipple on the bottom got pinched and it seemed wiser to replace than to try to bend that nipple back...
  8. K

    Swapped engine, wont start, HOT battery terminals

    Things checked so far. 12v at pink wire affirmative Removed glow plugs for easier cranking, 1st cycle of cranking, now resting still no fuel. Battery posts warm but not hot like yesterday. I also removed the one questionable wire and tested it for resistance to ground and positive wire...
  9. K

    Swapped engine, wont start, HOT battery terminals

    Roger that, thank you! Ill be bringing my computer to the shop and have internet there. Ill be posting as I go.
  10. K

    Swapped engine, wont start, HOT battery terminals

    Hey guys, First off Im sorry I dont have the time to search the forum for a possible answer to this so I am hoping that I can get some help before I get started tomorrow. I have one day left from fall break(school) and then its school/work again till dec 10th. Here's the run down. Swapped the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks