Search results

Finally got my winch setup installed. Front bolts are 1/2-20, with lengths of 1.0", 1.5", and 2.0". Oil capacity of the reservoir is approx. 7.25 gallons. Hydraulic filter is a Fram C1666 or Wix 51467. Specs on the 2 hoses going to the winch from the valve body are: 91" in length, 3/4"...

I'm good. Still need to get a pto from you sometime.

Got around to assembling everything onto my new rebuilt winch today. Have a question about the winch input shaft and the parts that connect the pump to the input shaft. I understand how the woodruff key works, it is definitely not a shear pin. Is the gold pin that goes thru the input...

tobyS, your pto's look skinny. I will probably buy one from you soon, I have more than one truck. An additional 1/2" will affect it, but I believe the pto will still install with the 2 toolbox/step support bolts removed. Will check what clearance I have and report back in this thread. Please...

I would like add to this thread with my recent winch install on my M923A0. I installed everything but the winch, frame extensions and pto in about 10 hours. The pto itself took about 7 hours, with a transmission oil change also done at the same time. There are definitely 2 different styles...