• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m-35tom

    FMTV Highway Speed

    that may be, but 1:1 would only be for hgy use and you would still have 2:1 for off road or high power situations.
  2. m-35tom

    FMTV Highway Speed

    my point is that the P1 planetary in the 3060 is a different ratio than the P1 planetary in the 3070. as far as programming that is entirely different issue. I still think speed change is best done in the hubs and I have a design for 1:1 and 2:1 selectable hubs
  3. m-35tom

    FMTV Highway Speed

    Hi, I was told by Allison that the difference was planetary P1. Please consider that they may have been right and reassess? Tom
  4. m-35tom

    FMTV Highway Speed

    OK, picture this. Take a hub apart, remove all 4 spider gears, remove both big gears, put the cross back is just to prevent oil loss or make 4 dummy plugs with 'o' rings and a flange on the inside to keep them in. Make a hub to mate with axle spline and mount it on the outer cover. Or make a...
  5. m-35tom

    FMTV Highway Speed

    And here is the issue!! Assuming this info is correct and it looks right, This is a MD3070PT trans. There is a civi 2 WD trans, the MD3060 and 6th is .65 which would solve the speed issue with 3.9 R&P The 3070 trans is likely the same trans, 6 speed with a lower 1st added making it a 7 speed. So...
Top