• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m16ty

    need a quick answer, 10k input seal replacment

    I just looked in the -34 TM. The TM calls for .005" end play on the shaft. Add or remove gaskets to get the correct end play. Personally, I wouldn't fool with the dial indicator. Just adjust it where you can feel a little movement in and out when you turn the shaft back and forth.
  2. m16ty

    need a quick answer, 10k input seal replacment

    You'll need to set your end play. When I put my winch back together I used RTV. When I tightened the bolts the winch locked up. I ended up having to use two gaskets (that I made myself) to get the winch to turn freely. You may can get by with using RTV but the bearings were too tight on mine...
108,589members
163,849threads
2,305,244posts
447online users
Top