Search results

steelypip, I have been following that threat with great interest. Unfortunately I do not have a load bank, I just feed the garage and turn lights/motors on. I just checked my notes on this unit again and it is a #16 button I need as I have a #12 in right now and the pc mark is two hash marks...

Jerry, Thanks, you gave me the idea to build my own. I ordered the nozzles/pintle right from AMBAC part# ADN6S526. Great people to deal with. Ed

Good news on this one. I finally got around to working on it again and with a good pump from Jerry she fired right up. The rpm was still advancing on its own even with the throttle cable pushed in all the way in (same condition even with another pump but not the reason I needed a pump). What...

Here's some close-ups of what I did. If you google homemade injection tester you will find many plans, I cannot remember which ones I used as I used several as a guide. I went with all high pressure fittings from McMaster Carr. I used an injection line as it already had the correct end for...

A while back I won a couple 002's and had to rob several parts from one to get the other one going (which was the plan from the start I imagine). This one wouldn't run well or respond to throttle inputs so it became the donor. I have decided to start gathering parts and see if this will be a...