Search results

The TMs are not very clear as to the packing procedures since the seal is not replaceable and the new bearings come prepacked with the seal installed I guessed them to not be repackable. That being said I repacked mine and was glad that I did since the outer seals had leaked diff oil into the...

A little bit of labor and about 1200 dollars will do all the wheels, its my plan if I ever have a bearing failure. The CTIS system is allready dissabled on mine.

I got the outer wheel seals at Erics surplus but they are available at many MV parts sales places, it seems all M35s use the same outer seal. It along with a small piece to cork gasket keeps the diff oil out of the outer bearing and hub center, although I am not sure the cork does much on the...

The Timken bearings numbers are 395WE for the inner bearing and 392E for the outer bearings, I called Timken and was told the bearings could only be sold to one of thier military supplier. I called one and was give a very high price then made the desision to just try repacking them although...

Good luck on the drive home, I drove mine about 300 miles before diff oil started leaking out one of the inner seals. The bearings did not seem to be damaged but all of the grease in all eight of the bearing was washed out by the diff oil.

The front bearings are next, where did you find inner bearings for 50$ I want to order 6 as well.

It would not fit into the inner bearing to cage space so I just pushed grease into the inner side until it uzzed out bellow the rollers.

The Inner Bearings were 970$ from one vendor and the outer was 480$ from the same vendor. There are not many options for vendors, I contacted Timken and was told that since the military still uses the bearing they could only sell it through authorized military suppliers but that thier cost on...

I retrieved my A3 in July and after putting a few hundred miles on it diff oil started leaking out of one of the inner wheel seals. After doing some research I found the bearings are not only very expensive but the inner bearings are packed at the factory by timken and the inner seal is part of...