Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well I spent two hours today welding nuts to a broken wheel lug stud and then twisting them off. Heated everything cherry red and still no luck. GRRRRRRR!!!! Tomorrows another day.
If you are going to drill it anyway, try wire welding or welding with a very small rod to close up the hole. Weld just a little and throw cold water on it. Continure this until you can weld a nut onto it. When you weld the nut quench it again. I would bet it would come right out. The...
RE: Re: RE: Good ideas for screw extraction, please
If you can get to it easily, I have used my small wire welder to very carefully build up the center of the bolt. Than place a nut over that and weld it. The heat usually lossens it up and it comes out.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!