Search results

Did a fuel system upgrade today the old in tank pump was tired and gummed up so I went with an air tex 24 volt listed as a heavy duty diesel pump. I replaced the original tank with an aluminum A3 tank plumbed it all in with JIC fittings and new hose also got a chance to install my racor fuel...

Thanks its very time consuming were finally getting good weather to work outside I have to mount the tires on the wheels this week.

Heres the newly repainted dash new data plates installed with stainless hardware the freightliner seat has been attached to the springer base I will be useing the same set up on the passenger side. I am going to replace the steering wheel with the same style from an 813 the bottom cushion is...

A few new pics I have been working on the inside of the cab this week windshield frames have new rubber gaskets have been cleaned, caulked and repainted now to trim the caulk sealing the seams under the windshield frame along the front of the cab.I have added all new rubber door gaskets...

Thanks John I wasnt going to do anymore bobbers guess I will never smarten up but the truck was a great deal and I want to have a daily driver I can use WMO in so this fit the bill. Im probably going to sell off the tires, rims and undercarriage to defray the cost of the trailer there is a...

Yes he did a good job on them he sells them in the classifieds here.

I dont think your going to keep all of the water out but there is a piece called the window wiper seal it runs along the window on the outside in the window opening (where your elbow rests while driving) it should be replaced when doing the channels. I replaced all of mine its a real PITA to get...

Window tracks are an easy install they are felt lined steel channels front one has a hook on the bottom that slides over a slot in the door frame top has a rivet holding it you can see it at the top once the door is opened. The back or latch side has the hook on top and a screw at the base...

A few more parts waiting to be installed.

Got the floor herculined and the springer bases cut down and angle welded in to bolt in the new freightliner highbacks a friend gave me. The seat bases will get a coat of OD if the damp cold weather ever finally goes away. Im planning on useing springer bases for both seats likeI did in my 813...

I just did some measuring the wheel well on the 1101 will end up pretty much at the same spot it ends up useing a 105 the wheel well being set further back on the 1101. I measured the deuce springs and the hangar on the rear will just have enough frame to fit if I cut the frame flush to install...

Anybody consider an 1101 bed for a bobbed deuce? I am bobbing a deuce I just bought and am weighing my options for the bed I have an 1101 sitting here in the drive and was measuring it up for an option. The trailer is a completely rivited together unit making fabrication and modification pretty...