Search results

Thanks for the wrapup. If it ever gets to where it cranks but will not quite run or it cranks but you do not see any smoke out of the exhaust after a few seconds like it is not getting fuel, it may be the magnetic pickup or MPU. Search MPU. I have had that problem twice on my 804a but not on my...

Any progress? Please let us know if you got it working which may be useful to someone in the future. Many folks disappear after a few posts and we never find out what worked or didn’t. Robert

The priming pump was from ebay, search Isuzu. Robert

Mine had around 47 hours when I got it. At first nothing did anything. I read about the dead crank switch and it would turn over from there. After a lot of tapping and wiggling wires, the solenoid would start of make noises. Eventually, it ran. You will need to drop the control panel cover...

Well start at the bottom and work your way up. Fuel in tank? Does it get to the priming pump? To the right of my manual priming pump is the line that goes to the injector pump, find yours and loosen there. As you pump, you should see fuel, if not find out why. I have replaced my priming...

You understand that you need to unscrew the top of the manual pump to release the plunger so that you can prime it, right? You will also need to crack the fuel lines as they go up to the injectors and pump until you see fuel, then tighten. Have you downloaded the books? Have you ever seen it...