• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    M1009 6" lift

    I removed my TC drop and my tick noise went away. I also pulled off the cross member and cut out the piece interfering with the front driveshaft. Everything is great now! brett
  2. R

    M1009 6" lift

    I only wanted 4". Not wanting to spend more on the lift than I did on the truck led me to RC. I added 37s to reduce the rpms. I had to trim the fenders a bunch to just get it off the trailer. 6" was the only lift I could find for the k30 with the exception of ORD. They were way to expensive with...
  3. R

    M1009 6" lift

    That's what I hear but don't understand the logic? The driveshaft is coming out of the transfer case and is rubbing the crossmember. If I lower the TC how does it not reduce the angle? It's looking like I'll be pulling the crossmember to replace the TC mounts and cut out a clearance spot for the...
  4. R

    M1009 6" lift

    I was thinking about cutting out a space for the ujoint on the cross member. Just didn't think I would need to do this. Doesn't the motor mounts keep the motor in line and not move it? another thing I noticed is the motor sounds different now. Rpm specific. Is there anything else I might be...
  5. R

    M1009 6" lift

    Trying to not start another thread. Installed 6" RC lift on my 1008. My front driveshaft at the TC is rubbing on the cross member. I used the stock hardware to drop the TC but it's still rubbing pretty bad. Can I make my own drop spacers and if so, how big should they be? Hoping to tap the...
Top