Search results

Success. Had to cut the bearing out. Here are a couple of tips. 1. Remove the left access door 2. Unbolt the terminal board and move it aside 3. Remove the door hinge center section. It will take some doing and a bit of bending, but it will come out. 4. Remove the generator cover plate 5. Remove...

OK Update. You were correct. It was hung up on the bearing. There were 2 keys to my success. 1. Remove the center support for the 2 access doors. This gave me access to the center of the generator. 2. Put some tension on the bell housing while simultaneously hitting the outside of the bearing...

The manual says that the top cover and control panel all have to come out and the generator to be removed. But it would seem like the bell housing would come off through the access doors in the front. But I've been tapping on my bellhousing trying to get it off and it seems pretty stuck on...

A nice thread on the bearing. I have a new to me 803A and I have just gotten her up and running. There is what I think to be a bearing noise that could be that bearing. Interesting that when I adjust the frequency a bit, the noise goes completely away. But then seems to return after several...