Search results

Find a bearing supplier. Locally I use Purvis or Bearing Warehouse. They can match most any bearing. Cheaper than a parts place, including NAPA, in most cases. Try Saturn Surplus and then Memphis Equipment as a last resort.

I had to pull one of the rear hubs due to brake issues. The bearings are the same as the front ones I posted. One is narrower than the other. I guess I just did not remember or did not really pay attention. I did keep bearing and race together when I did the hub flip.

I adjusted the bottom of the shoes and not the top. I think that is where the problem was. When I pulled the drum, one of the top adjusters was backed all the way off.

The numbers are the same but the width of the bearings are different. Look at the PIC above. Right ones or not. I was wondering if the Bower 392 might not be right.

Well I was thinking that the rear bearings were the same size. Maybe they are different. I was doing a hub flip to run singles at the time and kept everything together, inside / outside.

Well they are sometype hand held light with a magnet on the back, not sure what they are from. I also have some that are metal.

I tried to adjust the front brakes. When you turn the wheel it will spin and then one of the shoes will grab. Drove it and drum was getting very hot. I pulled the hub to check the brake shoes. Shoes look ok but the bearings are not the same. Are both front bearing the same? One of the...