Search results

Do you have a double hook chain? Should have the big cleavis in the middle and two open hooks on each end. Around 3 ft long total. Makes lifting items very easy. Especially if you are stacking tires you can reach thru the wheel and pick em up and get em off the chain without ever having to get...

You can do ramps like on the rear of this 1061 or You can look for a M345 trailer. Rated for 20,000lbs (put has 20k axles x 2 under it) just not as tall or as heavy as a M322. or an MTO16 which is the smaller version of the 322.

Well and if you cut the humps off and just make em flat then it gains another 3 inches. so you get another foot. I can send you some stronger springs for those ramps. Those are probably just too weak. SwampDonkey has some on his where actually has to pull the ramps down. they are just off the...

You can put 255/70/22.5s in dual mode on it and drop it down almost 9 inches. It just makes it harder to pull.

32320. Standard models weigh 29760. I just dont like the narrow tracks. Had to be loaded backwards. Alot of trackloaders cant make the climb. They just dont have the umph or front weight once it hits the humps. Unless you fill the bucket up. Sent from my SM-G965U using Tapatalk

That track loader is a little different. It was used by the railroad. Rather than being a standard lift and dump the bucket can actually angle out to one side and dump. I assume for loading rail cars from the side of the tracks.

The belt is on an eccentric. I use a long 3/8 extension to knock it around. You need a new crush seal just in case. They leak sometimes when you tighten it back up. Sent from my SM-G935P using Tapatalk

It your driving it from jackson to your place in east Tennessee its about 7hours. Sent from my SM-G935P using Tapatalk

if i ever get to go to south mississippi anytime soon

If you need it.moved i can handle it. What part of TN? I know the truck is in Jackson Sent from my SM-G860P using Tapatalk