Search results

Btu on these is rated at 31000 for heat and 36000 for AC by the manufacture. I was off by 1000 in what I was thinking

For some reason I was thinking I saw specs on these that the BTU on the heat side was 32,000. I could be wrong and thinking of another unit, but I remember being surprised that the BTU wasn't much lower on heat than air. Air filter wasn't clogged on either unit. Plenty of air flow for sure!

Pretty quick actually! Throw 2 extra logs in the burner and it is warm in a few minutes! Not quite the same though. I am not expecting them to warm things up in 20 minutes. I was just surprised by not having hot air coming out. The air is warm for sure, just not hot. But things may be different...

I fired a couple of these up yesterday. I used one at a time since I only had one 803a at this location. Felt heat coming out of it wasn't that great, but they did raise the temp in the building 12 degrees, 6 for each unit running about 20 minutes. I was expecting more felt heat coming out of...

Green always signifies ground. That is universal in North America. The reason a lot of 240v wiring has no neutral is it isn't needed. The only reason to have the neutral is if the device requires 120v somewhere inside of it. All of your old 240v stoves and clothes dryers were only 3 wire...

If the gen set is tied into a panel as mine are they should be unbonded. The bond should only be in one place. If the gen set is set up as prime power in the middle of a field and not connected to a panel then then bonded is correct.

Actually this picture of the hookup looks wrong to me. I haven't investigated the wiring on these, but I'm guessing that green wire should go to ground and not neutral. I don't think there is anything in these that requires 120v to need a neutral, but I'm sure it needs a ground!

No problem at all on the hookup. I was just hoping for a TM in case one didn't work. Doesn't look like there is to much to them. Part numbers would help in the event I need something though

30 amp on each phase? The info I found online says a max draw of 9.6kw total. Hookup won't be a problem. I was hoping for a TM in case I have one with problems. The ones I got were both marked condition A so hoping they are good. Someone spraypainted drained on them. Hoping they didn't drain...

Was anyone able to come up with the TM for this?