Search results

B100 or straight biodiesel is like rocket fuel in my benz!!!!! But it can be a pain to make and the methanol is expensive. A three way valve (pollard) works well. You could even set up a timer so it changed over automatically to wvo or set up a temp gauge to trigger it even better. shutdown is...

Understanding that the question was to cardoctor my take is if it is direct injection (into the cylinder) you probably don't want to use wvo unless it has been processed to biodiesel and washed. The coking occurs when the hot injector has wvo fused around it The injectors dont get as hot in an...

YOU SUCK!!:-D I believe you may be able to do 90/10 in the warm months and no you shouldn't have to filter it....LUCKY.:-D

I use a drum heater (55gal setup) Stump uses a water heater element or 2, I have insulated my tank with the rolled aluminum faced bubble wrap. It works good except I should have put a small amount of cardboard or some other insulator between the bubble wrap and the heater as now there is a line...

Dcwilkie Actually the oil gets slung against the side where g forces pull out the heavies. Kind of like an extreme tilt a whirl.

Simple centrifuge...thats the name but avengusa has built centrifuges too, if I had to do it over again I would buy his. Or you could build one if you have the skill...my buddy stump built his.

I currently drive my 300sd Benz on a blend 80% veg 20% diesel and have for years. Some of the newer engines I might hesitate to do that though. I have 1 tank. Me and Stump both use centrifuged oil to remove the heavies. As with anything your results may vary but so far I have excellent results...

Biodiesel can also destroy rubber fuel lines if not washed to take the pH down to 7. Viton fuel lines solve this problem.

Oh I probably have 15k miles on my diesel benz 300sd Mostly around town driving. It takes about a hour a week for the pickup and processing of 55 gal. The centrifuge runs without watching it. I also never had a cold start problem and I live in northern NC and I am a GA Tech Grad!:-D

Hi I have been running blended WVO for over 3 years in my Benz and now my M1009. I had excellent success. Engine maintenance= 0$ (ok I did change my oil and filter a few times in 3 years!) My reccomendation is ! Dewater in a heated barrel and 2 filter the crap out of it and 3 blend with diesel...