Search results

The 27si alt I use with my 24volt kits is the best bang for the buck I have seen. It goes for around 115 and is a 65 amp alt.I spent weeks looking for the best options out there.if you find a better option please let me know but pats small engine is the best place I have found to get new alta

Your Filter housing does apprear to be father forward than mine is on my truck... My filter housing is just behind the part of the bracket where the lower rear mounting tab on the alt is.

Lowtech my brackets are built to use the stock pulley that has been drilled to 7/8 with the stock belts ..If you use different belts or pulley you most like will have issues .. When it is all installed correctly the adjusting bolt will fall right in the middle of the slot in the adjusting arm...

Your install is correctExcept you need both belts on there and you need to install the nut and lock washer on the bolt going through the adjusting arm into the alt.. The small wire is not used as the alt is a one wire alt.. All that needs to be hooked up is the ground and the main hot wire which...

I see alot of companies seeling name brand parts as theirs ... Alot of places buy ford parts and machine the ford logo and part number off and sell them really cheap..Same as ford buys borg warner parts and puts their logo on them...I also see places put delco or borg warner parts in their box...

Where did you purchase the alt?

I'm not sure how to post the link.. It is in the classifieds. i think you can do a search in the classifieds for 24 volt brackets or 24 volt alt

The part number for the pulley depends on the bracket... there are different belt widths, different diameters,and different off sets.. the offset is the biggest issue.. I built my brackets to use the stock pulley as most guys will have the one off the old alt..I have found a few that are very...

Some of the pros of the delco alt is you can get them new for $115. They are readily avialible at most truck parts store.They are less rotating weight- rob less power from the engine.As far as weather they hold up to undwater use.. i have never had an issue But i have gone thru three stock alts...

My kit the alt mounts exactly like the stock one.The two mounting tabs are at the bottom Which is where it pivots the adjusting arm goes to the mounting tab on the top . It mounts to the stock holes on the block and water pump. My brackets are cut out on my plasma table and welded in a jig a...

Kenny I will relief it tonight I had been super busy lately and don't like to have the ad up unless I have them built ready to ship

What are you talking about my bracket is almost exactly like the stock bracket....You are confusing my brackets with the other guys stuff. Mine is nothing like wolverines brackets.. My brackets bolts on with the same three bolts that hold the stock bracket on and the adjusting arm goes on in the...