jatonka
Well-known member
- 1,801
- 57
- 48
- Location
- Ephratah, New York
I haven't bought the 1133 filters in years, if it's now in there, that's great. It willseem too big until you clean the recessed groove totally. JT
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Fuel filter o ring help
- Thread starter jlpayne
- Start date
I haven't bought the 1133 filters in years, if it's now in there, that's great. It willseem too big until you clean the recessed groove totally. JT
- 6,426
- 4,978
- 113
- Location
- Ft. Lauderdale, Florida
See post #8, I found multiple gaskets in the slots and that is not the way to do it.
Updide down and backwards is not my favorite way to work, the whole thing comes right off.
Anywho the seal ring gasket that belongs in there is square, not round.
I wanted it to be perfect as the plan was to Never change those filters again due to my fuel filter 3 micron setup.
Updide down and backwards is not my favorite way to work, the whole thing comes right off.
Anywho the seal ring gasket that belongs in there is square, not round.
I wanted it to be perfect as the plan was to Never change those filters again due to my fuel filter 3 micron setup.
