- 5,514
- 2,722
- 113
- Location
- Metairie/La (N'awlins)
I notice there are 2 different under the bed pioneer tool rack tray/holders part number 12340288 & 12340289.
What is the difference in them?
What is the difference in them?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
pioneer tool rack difference?
- Thread starter juanprado
- Start date
- 7,054
- 138
- 63
- Location
- Mid Hudson Valley NY
Where they attach to the frame.
- 5,514
- 2,722
- 113
- Location
- Metairie/La (N'awlins)
I did not see that. I just saw the bracket that it nestles into on the cross member. What is the other style?
I saw both styles on ebay and trying to figure out which to buy? I have found the Kascar brackets to use with an airlift bumper upgrade I am doing to retain use of the rack.
Thanks for your help!
I saw both styles on ebay and trying to figure out which to buy? I have found the Kascar brackets to use with an airlift bumper upgrade I am doing to retain use of the rack.
Thanks for your help!
- 10,174
- 5,884
- 113
- Location
- Camp Wood/LC, TX
I vaguely remember one is for airlift bumper and the other not.
- 5,514
- 2,722
- 113
- Location
- Metairie/La (N'awlins)
the 12340288 is used for the original bumper or mwo towing upgrade.
The airlift bumper requires the 12340289 as it nestles into the diagonal inner braces.
If you have a 12340288 it can be converted easily to a 12340289 by adding 2 angle brackets $4 each from kascar. 5583234 L, 5583235 R
The airlift bumper requires the 12340289 as it nestles into the diagonal inner braces.
If you have a 12340288 it can be converted easily to a 12340289 by adding 2 angle brackets $4 each from kascar. 5583234 L, 5583235 R
Attachments
ElKapetan
New member
- 7
- 0
- 0
- Location
- Lancaster, OH
Just finished adding airlift bumper to A1, now can’t get shovel to fit. Shovel blade hits the diagonal bumper braces and frame when I try to latch the rack, can’t find good pics to show how supposed to fit. Using newer rack for Airlift, standard shovel. Any suggestions?
Last edited:
- 5,514
- 2,722
- 113
- Location
- Metairie/La (N'awlins)
Make sure it is the correct shovel and not a longer civy model?
I have some pics on post 25 but not the exact angle of the shovel? Not sure if this will help?
https://www.steelsoldiers.com/showthread.php?157259-Juan-s-M998-HMMWV/page3
The bracket on the cross member does have some adjustment/slop that the front of rack slides into.
I have some pics on post 25 but not the exact angle of the shovel? Not sure if this will help?
https://www.steelsoldiers.com/showthread.php?157259-Juan-s-M998-HMMWV/page3
The bracket on the cross member does have some adjustment/slop that the front of rack slides into.