Generator Accessories

Howdy,

Generator Accessories



slide hammer
slide rod driver/puller rod
5120-01-013-1676 SLIDE HAMMER, GROUND 13226E7741



ground rod, knuckles, ground strap, drive head bolt
5975-00-878-3791 RODS, GROUND SECTIONAL 9FT AA-55804-III-B
5975-00-794-2523 COUPLINGS, (THREE IN SET)
5975-00-924-9927 DRIVE/HEAD STUD



remote 55gal/5gal fuel pickup adapter
2910-00-066-1235 ADAPTER ASSY, FUEL DRUM 13211E7541
7240-01-337-5269 FUEL CAN, OLIVE DRAB
7240-00-177-6154 FLEXIBLE SPOUT



aux fuel supply line
4720-00-021-3320 or 4720-01-469-7057 HOSE ASSEMBLY, NONMETALLIC



Oil drain elbow
4730-00-809-9703 ELBOW, PIPE TO HOSE MS24519-9



trailer grounding stud
5940-00-021-3321 GROUND TERMINAL STUD MS39347-2



6awg braided copper ground



carbon dioxide fire extinguisher
4210-01-361-6921 Fire Extinguisher, CO2


Hammer
5120-00-251-4489 Sledge Hammer, 8lbs.


Trailer Mounted Accessories Box

I bought one of the generator trailers out of Letterkenny recently and was surprised to discover a box of tools was included. This worked well for me because I haven't received anything except 1 aux. fuel line with the 2 generators I've purchased. The tool box had just about everything except an auxiliary fuel line. There was a bag of fittings that included bolts for bolting generator to trailer, tool box to trailer, the ground stud, and 2 oil drains - 1/2" and 3/4" pipe - with hose and clamps. Also had an 8 lb sledge hammer and ground rod kit (rods, slide hammer, bolts/nuts) in it. A VERY nice surprise!!!

Pictures speak louder than words!

Zed254 said:

I bought one of the generator trailers out of Letterkenny recently and was surprised to discover a box of tools was included. This worked well for me because I haven't received anything except 1 aux. fuel line with the 2 generators I've purchased. The tool box had just about everything except an auxiliary fuel line. There was a bag of fittings that included bolts for bolting generator to trailer, tool box to trailer, the ground stud, and 2 oil drains - 1/2" and 3/4" pipe - with hose and clamps. Also had an 8 lb sledge hammer and ground rod kit (rods, slide hammer, bolts/nuts) in it. A VERY nice surprise!!!

Click to expand...

I have to ask... What kind of covers did you make for the air intake grates. I'm currently wrapping mine up in a tarp, not sure if it keep moisture out or in. So far I removed one mouse nest and afraid there are more coming.

Thanks,
Erik

Sent from my XT1254 using Tapatalk

Grizzlypower2001 said:

I have to ask... What kind of covers did you make for the air intake grates. I'm currently wrapping mine up in a tarp, not sure if it keep moisture out or in. So far I removed one mouse nest and afraid there are more coming.

Thanks,
Erik

Sent from my XT1254 using Tapatalk

Click to expand...

Howdy,
The thread is about generator accessories.


Zed talk's about that here. https://www.steelsoldiers.com/showt...ver-Your-803&p=2002338&highlight=#post2002338

More options here: https://www.steelsoldiers.com/showthread.php?149586-Do-You-Cover-Your-803

Got any part #'s for the plastic Box Wrenches used on load terminals and which model genset load terminals they can be used on? I have looked in TM's but can't seem to put my finger on Box Wrench p/n for MEP-002a/-003a.

Chainbreaker,

There never was any box wrench made for any MEP-002A to 007A.

Guyfang said:

Chainbreaker,

There never was any box wrench made for any MEP-002A to 007A.

Click to expand...

Hmmm, I see box wrenches advertised from time to time on eBay that "allegedly" are supposed to fit -002A/-003A load terminals. I once bought one of those that seller advertised to fit -002a; unfortunately it was a big honker that did not fit (P/N: CTM-282 / 5120-00-138-3790). Well...I guess if they never made a box wrench to fit the -002a/-003a load terminals I should just stop looking and use a metal one.

An image of the wrench from my MEP-803A is attached for part numbers. A 1-3/8 combination wrench fits the lugs. No idea if it will fit an 002a/003a. Part number is 30554 88-21146.

I didn't say that some of the wrenches won't fit. I said the milatary didn't make one especially for the 002 & 003. Now if I wanted to really know, I would look at the NSN of the load terminal, in several different parts manuals, and compare that to the various TQG parts manuals. I might just do that when I am using my computer, and not this silly tablet.

I think the wrench for the 802/803 works just fine on the 002/003 (I think I have used this many times on the 002 I just sold).

I just won an 803 at Letterkenny but it only came with a terminal wrench trailer jack crank and 3 ground rod sections.

Sent from my SM-G935V using Tapatalk

reset2 said:

I just won an 803 at Letterkenny but it only came with a terminal wrench trailer jack crank and 3 ground rod sections.

Sent from my SM-G935V using Tapatalk

Click to expand...

I’m looking for the housing cover that goes over the cylinders on my MEP-002 generator. It came without one. Anyone know where I might find one?


Sent from my iPhone using Tapatalk

Send a PM to Ray 70, and start a Want Add in the Parts wanted forum. When you post something to an old thread, often you do not get the visibility you need.

Guyfang said:

Send a PM to Ray 70, and start a Want Add in the Parts wanted forum. When you post something to an old thread, often you do not get the visibility you need.

Click to expand...

Thank you again for your help.


Sent from my iPhone using Tapatalk

DOGWOODRIDGE said:

I’m looking for the housing cover that goes over the cylinders on my MEP-002 generator. It came without one. Anyone know where I might find one?
Sent from my iPhone using Tapatalk

Click to expand...

I don't know if they have them now or not, but I got a different replacement part of the enclosure for my MEP003A from Delks several years ago. The price was very good at the time.

glcaines said:

I don't know if they have them now or not, but I got a different replacement part of the enclosure for my MEP003A from Delks several years ago. The price was very good at the time.

Click to expand...

Thank you


Sent from my iPhone using Tapatalk