Crazy wrench head bolts Deuce

Crazy wrench head bolts Deuce
Just some stuff to post here.
Sometimes my files disappear, don't know why.
Maybe I was bad. But don't want to loose these.

Here's one I made years ago after breaking 3 of those cad plated pos wrenches the surplus dealers were selling.

I cranked a regular ring spanner (wrench) using heat, and it worked just fine.

For the adapters that have the 1/2" drive socket offset from the hex socket end, how do you calculate your actual applied torque? The added leverage of the offset will give a higher torque on the fastener than your wrench is showing. The adapters that have the 1/2" drive socket directly above the hex socket end via means of the multiple offsets give a 1 to 1 reading as one wants to be accurate. Pictured is a military surplus wrench I have which gives accurate direct reading.

http://cncexpo.com/torqueadapter.aspx

If it is at 90 degrees to the lever(handle) it does not matter.

^^What he said.

I have obviously never had to remove the bolts these tools are designed for. What do you need these for?

Nuts holding the heads to the block on the driver side.

here is more crazy wrench data
View attachment crazy wrench 3.pdf

View attachment crazy wrench 1.pdf