Page 1 of 11 1 2 3 4 5 ... LastLast
Results 1 to 10 of 102

Thread: Jeepsinker's M35A2 6BT Cummins swap ( pics and videos)

  1. #1
    4 Star General Jeepsinker's Avatar
    Join Date
    Aug 2013
    Location
    Dry Creek, Louisiana
    Posts
    5,119
    Thanks
    1,129
    Thanked 1,931 Times in 1,071 Posts

    Default Jeepsinker's M35A2 6BT Cummins swap ( pics and videos)

    Hey guys, I know I don't post a whole lot in here anymore, but I thought this project might interest you since this swap is going to become a necessity in the coming years. I will be posting pics and explaining things here as questions arise, but you can also follow the project on my YouTube channel here: https://www.youtube.com/channel/UC_6...vNe4HK4CCpO21w
    Attached Images Attached Images
    I sink Jeeps... That is all
    1969 Kaiser Jeep M35a2 w/winch (Daily driver, no joke)
    Now a hot rod deuce: 6BT swap in progress, Waterloo overdrive, 2 micron fuel filtration installed, riding on 11.00r20s
    1971 M151A2 w/ ROPS
    3: 87' M35a2c Air Force trucks
    1991 BMY M936a2 wrecker
    2: M1061 flat trailers
    1: Fresh rebuilt and load tested good Mep003a genset
    I do Fort Polk and other recoveries in my state. I can be reached at 337-401-2470

  2. The Following 17 Users Say Thank You to Jeepsinker For This Useful Post:

    18operator (05-04-2019), bigbe5678 (05-03-2019), Bill W (05-04-2019), brianrbull (05-05-2019), cbrTodd (05-03-2019), davidb56 (05-03-2019), dmetalmiki (05-07-2019), Floridianson (05-03-2019), gringeltaube (05-03-2019), Iron Maiden (05-12-2019), Kwaligura (05-03-2019), Mandalore (05-08-2019), microjeep (05-16-2019), QUADJEEPER (05-12-2019), silverstate55 (05-04-2019), Tow4 (05-06-2019), Trailboss (05-03-2019)

  3. #2
    Sergeant Major davidb56's Avatar
    Join Date
    Feb 2019
    Location
    Bonners Ferry Idaho
    Posts
    171
    Thanks
    198
    Thanked 117 Times in 73 Posts

    Default

    Have you researched a DT466? I have not, but am impressed with them.

  4. #3
    dumpsterlandingfromorbit! gimpyrobb's Avatar
    Join Date
    Dec 2005
    Location
    Cincy Ohio
    Posts
    27,507
    Thanks
    2,425
    Thanked 8,731 Times in 4,555 Posts

    Default

    Good to see you back again!

  5. The Following 4 Users Say Thank You to gimpyrobb For This Useful Post:

    Ferroequinologist (05-06-2019), Jeepsinker (05-03-2019), silverstate55 (05-04-2019), wheelspinner (05-03-2019)

  6. #4
    4 Star General NDT's Avatar
    Join Date
    Dec 2008
    Location
    Camp Wood/LC, TX
    MVPA
    4954
    Posts
    7,151
    Thanks
    2,073
    Thanked 3,579 Times in 1,888 Posts

    Default

    Looking good in the engine bay and the rest of the paint looking good as well.
    Haha I always figured the multifuel engine would be like the cockroach, still running after all other engines dead and gone.

  7. The Following 4 Users Say Thank You to NDT For This Useful Post:

    98G (05-03-2019), dmetalmiki (05-07-2019), Jeepsinker (05-03-2019), marchplumber (05-03-2019)

  8. #5
    4 Star General Jeepsinker's Avatar
    Join Date
    Aug 2013
    Location
    Dry Creek, Louisiana
    Posts
    5,119
    Thanks
    1,129
    Thanked 1,931 Times in 1,071 Posts

    Default

    Quote Originally Posted by davidb56 View Post
    Have you researched a DT466? I have not, but am impressed with them.
    Yes I have researched them extensively and concluded that they are not the best candidate for this application. The length negates the installation of an air to air charge air cooler, they are much heavier than the Cummins, they still utilize a belt driven compressor, and they have many more points of cooling system failure which they are quite prone to failing at.
    I sink Jeeps... That is all
    1969 Kaiser Jeep M35a2 w/winch (Daily driver, no joke)
    Now a hot rod deuce: 6BT swap in progress, Waterloo overdrive, 2 micron fuel filtration installed, riding on 11.00r20s
    1971 M151A2 w/ ROPS
    3: 87' M35a2c Air Force trucks
    1991 BMY M936a2 wrecker
    2: M1061 flat trailers
    1: Fresh rebuilt and load tested good Mep003a genset
    I do Fort Polk and other recoveries in my state. I can be reached at 337-401-2470

  9. The Following User Says Thank You to Jeepsinker For This Useful Post:

    silverstate55 (05-04-2019)

  10. #6
    Sergeant Kwaligura's Avatar
    Join Date
    Oct 2018
    Location
    Adena, Ohio
    Posts
    79
    Thanks
    27
    Thanked 98 Times in 42 Posts

    Default

    I always enjoy your YouTube channel. Happy to see you back again.
    1970 M35A2 WOW
    1976 M35A2C WOW
    Was a fuel tanker at one time
    1973 M35A2 parts truck

  11. The Following User Says Thank You to Kwaligura For This Useful Post:

    Jeepsinker (05-03-2019)

  12. #7
    4 Star General Jeepsinker's Avatar
    Join Date
    Aug 2013
    Location
    Dry Creek, Louisiana
    Posts
    5,119
    Thanks
    1,129
    Thanked 1,931 Times in 1,071 Posts

    Default

    Glad you enjoy it. I make the videos for you guys, so I'm glad.
    I sink Jeeps... That is all
    1969 Kaiser Jeep M35a2 w/winch (Daily driver, no joke)
    Now a hot rod deuce: 6BT swap in progress, Waterloo overdrive, 2 micron fuel filtration installed, riding on 11.00r20s
    1971 M151A2 w/ ROPS
    3: 87' M35a2c Air Force trucks
    1991 BMY M936a2 wrecker
    2: M1061 flat trailers
    1: Fresh rebuilt and load tested good Mep003a genset
    I do Fort Polk and other recoveries in my state. I can be reached at 337-401-2470

  13. The Following 2 Users Say Thank You to Jeepsinker For This Useful Post:

    Bill W (05-04-2019), microjeep (05-16-2019)

  14. #8
    4 Star General Jeepsinker's Avatar
    Join Date
    Aug 2013
    Location
    Dry Creek, Louisiana
    Posts
    5,119
    Thanks
    1,129
    Thanked 1,931 Times in 1,071 Posts

    Default

    Franz, you'll have to see it in person sometime. It is beautiful. I'm impressing myself actually.
    I sink Jeeps... That is all
    1969 Kaiser Jeep M35a2 w/winch (Daily driver, no joke)
    Now a hot rod deuce: 6BT swap in progress, Waterloo overdrive, 2 micron fuel filtration installed, riding on 11.00r20s
    1971 M151A2 w/ ROPS
    3: 87' M35a2c Air Force trucks
    1991 BMY M936a2 wrecker
    2: M1061 flat trailers
    1: Fresh rebuilt and load tested good Mep003a genset
    I do Fort Polk and other recoveries in my state. I can be reached at 337-401-2470

  15. #9
    3 Star General SCM35A2's Avatar
    Join Date
    Sep 2017
    Location
    Florence, SC
    Posts
    816
    Thanks
    1
    Thanked 689 Times in 335 Posts

    Default

    Subscribed!

  16. The Following User Says Thank You to SCM35A2 For This Useful Post:

    Jeepsinker (05-04-2019)

  17. #10
    4 Star General /Moderator doghead's Avatar
    Join Date
    Jan 2006
    Location
    NY
    MVPA
    8675309
    Posts
    25,926
    Thanks
    2,511
    Thanked 13,766 Times in 5,956 Posts

    Default

    What's a youtube channel?

    Is it on dish, cable or good ol' rabbit ears?
    M817, M818, M819, M35A2 w/w, M35A2, M109, M105, M116A2, M101A2, Pioneer tool trailer, MEP-002, MEP-017A, 5ton winch shear pins, Oral-B toothbrush

    Ah Beefco Industries Northeast marketing associate

    Don't judge a fish by its ability to climb a tree

    https://www.youtube.com/watch?time_continue=12&v=T6BTcEwtmZo


  18. The Following User Says Thank You to doghead For This Useful Post:

    Jeepsinker (05-04-2019)

Page 1 of 11 1 2 3 4 5 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •