• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Tire Pressure

CES 3245th

Member
102
0
16
Location
Boston Ma
I know the TM calls for 70# tire pressure on all (6) 14.00R20 Michelin XZL on a M923A1 5 Ton. The primary driving of this vehicle will be done on asphalt. I have been asking around in the MV community about tire pressure and getting different numbers from different people. So with all that said, what is a good number to run on these tires without a load on the back.

Thanks in advance
 

tobyS

Well-known member
4,820
816
113
Location
IN
I run 60-65 on my M929A2. If I were to load heavy, I would go to 80+. I'm running 395's now not 14.00, which are actually higher payload capacity than 14.00. Both rims and tires have a max pressure on them, I believe.... rims being lower than the tires.
 

M35A2-AZ

Well-known member
Steel Soldiers Supporter
3,213
381
83
Location
Tonopah, AZ
I run 70 psi on the front and 60 psi on the rears of my 14.00x20's. On a M936a1, A2 I would run 90 all around.
 
Top