Results 1 to 6 of 6

Thread: Eaton CTIS PCU rebuild

  1. #1
    Corporal
    Join Date
    May 2019
    Location
    Wisconsin
    Posts
    31
    Thanks
    5
    Thanked 14 Times in 11 Posts

    Tech Eaton CTIS PCU rebuild

    I am looking into rebuilding the PCU for my CTIS M936A2 wrecker. If this works I will be able to rebuild others if needed. I will keep you guys updated.

  2. The Following 2 Users Say Thank You to knelezen For This Useful Post:

    M1078MAN (06-04-2019), Russ Knight (06-11-2019)

  3. #2
    Corporal
    Join Date
    May 2019
    Location
    Wisconsin
    Posts
    31
    Thanks
    5
    Thanked 14 Times in 11 Posts

    Default

    I got it to work. I might be able to post some pictures if anyone is interested.
    Kevin Nelezen
    M936A2 Wrecker
    M35A3 Deuce
    M105A2 Trailer
    MEP-016C

  4. #3
    4 Star General Steel Soldiers Vendor Suprman's Avatar
    Join Date
    Feb 2013
    Location
    Stratford/Connecticut
    Posts
    6,559
    Thanks
    31
    Thanked 2,324 Times in 1,535 Posts

    Default

    There are rebuild kits available. Sometimes you can just clean it and use generic o rings.

  5. #4
    Corporal
    Join Date
    May 2019
    Location
    Wisconsin
    Posts
    31
    Thanks
    5
    Thanked 14 Times in 11 Posts

    Default

    I had the solenoid go out. I thought it was the valves so I cleaned them and replaced the o-rings. But the solenoid for the control vavle went out. I did an ohms test an it was open. I switched it with the deflate solenoid and I could inflate but not deflate. I purchased a solenoid pressure valve
    From eBay and used just the solenoid. I wired it in and it's good as new now.
    Kevin Nelezen
    M936A2 Wrecker
    M35A3 Deuce
    M105A2 Trailer
    MEP-016C

  6. #5
    Super Moderator Tinstar's Avatar
    Join Date
    Aug 2013
    Location
    Edmond, Oklahoma
    Posts
    3,589
    Thanks
    920
    Thanked 2,407 Times in 1,392 Posts

    Default

    Yes post any pics and detailed information, part numbers, etc that you can.
    Post pics direct to Steel Soldiers site as links go dead eventually.
    1987 M1008A1 (2)
    1986 M1009
    1995 NF2D FloodLight/Kohler-Kubota Generator Set
    1992 M101A2 trailer (2)
    1987 M149A2 Water Buffalo (M149A1 Chassis)
    S-280 Shelter

  7. #6
    3 Star General Andyrv6av8r's Avatar
    Join Date
    Jul 2010
    Location
    Spartanburg,SC
    Posts
    826
    Thanks
    242
    Thanked 684 Times in 267 Posts

    Default

    I have several Peter Paul coils/solenoids available if you need any.
    M1045A2 HMMWV, latest project

    M923A2 2012 Rebuild, aka Romeo-Mike, aka HellCat

    M105A2

    M1079 LMTV, Shrek, sold to kenet3621, now belongs to Adventure Driven

    M932A2 2010 Rebuild, now with 11' cargo bed, aka Shorty

    FLU419 SEE 1990, aka Kermit the Mog, sold to The Unimog Center in New Hampshire

    1997 M1078 LMTV, aka " Wall-E "

    Reach me at 864-978-0243

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •