• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

V Belt for larger PS pulley groove?

erasedhammer

Active member
843
56
28
Location
Maryland
Did the 12v conversion and deleted the driver's side alternator and now I'm trying to find a v belt that fits the larger groove on the PS pulley.

Anyone know the circumference difference between the inner and outer grooves on the power steering pulley?

I do not have a way to measure it.
 
Last edited:

porkysplace

Well-known member
Steel Soldiers Supporter
9,604
1,486
113
Location
mid- michigan
Did the 12v conversion and deleted the driver's side alternator and now I'm trying to find a v belt that fits the larger groove on the PS pulley.

Anyone know the circumference difference between the inner and outer grooves on the power steering pulley?

I do not have a way to measure it.
You don't have any rope ?
 

ridenby

Member
144
18
18
Location
Frankfort,Ky
Did the 12v conversion and deleted the driver's side alternator and now I'm trying to find a v belt that fits the larger groove on the PS pulley.

Anyone know the circumference difference between the inner and outer grooves on the power steering pulley?

I do not have a way to measure it.
Could you share belt size you used? Please.
 

erasedhammer

Active member
843
56
28
Location
Maryland
IMG_20220616_185445_620.jpg
IMG_20220616_185509_776.jpg
IMG_20220616_185529_289.jpg
IMG_20220616_185603_442.jpg

Belt for the larger groove pulley is a Gates XL 7475 11A1205.

I would be hesitant about that exact belt. It is just a little bit too long. When the PS pump is tensioned, it is still a bit loose compared to the inner belt.
Haven't had any squeaks when turning though.

Id say if you could find a belt 5mm shorter, it might tension up better.
 
Top