Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ding ding ding, may be able to pull the head, clean the liners and let it rip; but Kitty parts aren’t cheap. I think it’s due to the humid environment the trucks got parked in. Hope you didnt pay too much for it
Cat makes a baring tool that bolts in in place of a starter than you can use the wrench of your choice to bar it over. I would pull the oil pan and loosen up mains and rodds first before pulling the heads. if you have a piston locked up in a liner than your going to have pull the rod loose from the crank any way