• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Help ID a part.

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,095
9,264
113
Location
Mason, TN
Can someone please tell me what is suppose to be in the circled are in the photo. This is on a 1998 M1078. Thanks in advance.
Ether start cylinder.

Napa #33118
Lower gasket # 33119

Not really needed in Hawaii though probably
 

Ronmar

Well-known member
3,295
6,646
113
Location
Port angeles wa
No, if the engine was cold enough(below freezing), you have to push a switch on the dash(top row second from left I think) to get it to spray ether into the intake to help very cold starts...
 

NDT

Well-known member
Steel Soldiers Supporter
10,174
5,884
113
Location
Camp Wood/LC, TX
Put your cover back on the air hydraulic unit or rain will enter through the muffler, I learned the hard way.
 

Valley Rock

Big wheeler cat peeler
Steel Soldiers Supporter
324
523
93
Location
Rogue Valley OR
That's where your nitrous bottle goes .

I recommend stepping up to the more better setup like the one pictured below .
 

Attachments

Top