Seems to be a lot of info out there about these dang belts. I was missing the drivers side belt to the alternator. It routes to the outside groove on the power steering pump. According to the pictures posted above, mine is routed the same way. Also, I put a belt on that is very tight with no way for me to make an adjustment unless it loosens up. Well, now the power steering pump squeals like crazy when idling. It sometimes goes away but comes back. The belt in the inside grove on the PSP goes around the Water pump. The water pump pulley has a middle groove with nothing on it. I’m wondering if the driver’s side alt belt is supposed to route to the power steering pump and the middle groove of the water pump....looks like it’s back to searching the TMs!