Page 15 of 16 FirstFirst ... 5 11 12 13 14 15 16 LastLast
Results 141 to 150 of 151

Thread: MEP-002A and -003A main breaker

  1. #141
    Colonel GREENMV's Avatar
    Join Date
    Dec 2008
    Location
    Linden, TN
    Posts
    325
    Thanks
    176
    Thanked 144 Times in 92 Posts

    Default

    I want to Thank jamawieb for His wisdom, The Idiot award for today go's to Ding, Ding, Ding "MYSELF" I got myself into trouble again assuming my 10Kw Gen was complete with only 40 hours on It and had the correct 10Kw AC box. I got to thinking about what jamawieb said about the CVT1's being different on the 5Kw and the !0Kw so this morning I checked my 10Kw to see the wraps on the CVT1 and It was staring right at me, I had a 5Kw AC box on a 10Kw Gen. No wonder my breaker was tripping. Now I have a brand new breaker for a paper weight. It just go's into Parts Stock? The moral of this story Is, If your Breaker Is Tripping when It shouldn't be, check you AC Box first.
    1990 M116A2 M103A2
    1985 M1009
    1991 M101A2


  2. The Following User Says Thank You to GREENMV For This Useful Post:

    Guyfang (03-11-2017)

  3. #142
    4 Star General Guyfang's Avatar
    Join Date
    Dec 2015
    Location
    Burgkunstadt, Germany
    Posts
    6,299
    Thanks
    12,326
    Thanked 5,662 Times in 2,713 Posts

    Default

    It maybe not the ONLY reason, but your right, everyone should look. The same thing happened to me with a 60 KW. It was mounted on a large ROWPU. I turned it on, turned on the main circuit breaker for the ROWPU, and all was well. Then a very large pump kicked on, the gen set went into high speed, trying to correct itself for an extremely large load, and then shut down for overload. You would have thought the set was going to jump off the trailer! I figured the load out in KW, and it came to 35 KW. How can it go into overload shutdown? About 3 days later, it dawned on me to check the CT's. I didnt say a word. Changed i,t and slunk out of town.

  4. #143
    Colonel GREENMV's Avatar
    Join Date
    Dec 2008
    Location
    Linden, TN
    Posts
    325
    Thanks
    176
    Thanked 144 Times in 92 Posts

    Default

    Life isn't life unless you learn something every day. I have read the TM's 100's of times, and worked on at least 10 Gen's. but the TM's don't teach experience and that there are smarter people than me.
    1990 M116A2 M103A2
    1985 M1009
    1991 M101A2


  5. #144
    4 Star General Guyfang's Avatar
    Join Date
    Dec 2015
    Location
    Burgkunstadt, Germany
    Posts
    6,299
    Thanks
    12,326
    Thanked 5,662 Times in 2,713 Posts

    Default

    Amen!

  6. #145
    3 Star General bones1's Avatar
    Join Date
    Sep 2010
    Location
    Southern Maryland
    Posts
    839
    Thanks
    235
    Thanked 86 Times in 58 Posts

    Default

    What is the "ac box" you are referring to?

    "I'll be your Huckleberry"

  7. #146
    Colonel GREENMV's Avatar
    Join Date
    Dec 2008
    Location
    Linden, TN
    Posts
    325
    Thanks
    176
    Thanked 144 Times in 92 Posts

    Default

    @bones1, Control box assembly, AC output. The Box the Breaker is located In.
    1990 M116A2 M103A2
    1985 M1009
    1991 M101A2


  8. The Following User Says Thank You to GREENMV For This Useful Post:

    bones1 (03-12-2017)

  9. #147
    4 Star General Guyfang's Avatar
    Join Date
    Dec 2015
    Location
    Burgkunstadt, Germany
    Posts
    6,299
    Thanks
    12,326
    Thanked 5,662 Times in 2,713 Posts

    Default

    Every person I have ever heard from, or read comments from, who has great knowledge and experience on the MEP-002A and MEP-003A, has posted at some time on this thread. What do you all think about a document, maybe a sticky, that gives some pointers to people who want to buy one, and do not have the foggiest idea about gen sets? Or just do not know these gen sets? A few basic points, that they should use when looking at one, or after they get one home, and don't know where to start. Please put your comments down here. If you want to contribute, we could do it with PM's. Someone start writing, and send it to someone else. They take a look, and then suggest adding something, changing something or deleting something. Too often we assume people have a good handle on mechanics, and troubleshooting. It not always the case. Doing a few smart things at the start, can save lots of time and money in the end.

  10. The Following User Says Thank You to Guyfang For This Useful Post:

    GREENMV (03-26-2017)

  11. #148
    Colonel GREENMV's Avatar
    Join Date
    Dec 2008
    Location
    Linden, TN
    Posts
    325
    Thanks
    176
    Thanked 144 Times in 92 Posts

    Default

    I agree with everything you suggested. This main Breaker Thread started 12/5/10 and that makes a lot of reading material that's not all main breaker. This could be added to the list. My first suggestion to whomever wants a surplus generator thinking there going to get a plug & play at a cheap cost, most likely your not and it always turns out your going to spend more money than you thought you were. You must do your research before you buy a surplus generator. What Model and Kw generator do you need. To the beginners a 3Kw or 5Kw will "Not" power your whole house with a 3 Ton A/C. I would also suggest when you do pick a generator your interested in buying, please read the TM's on It to get a basic knowledge of what your buying. You must also have basic electrical knowledge, Volts, Amps, Resisters, Diodes, AC Vr's, DC Vr's, Transformers, Switches, Gauges, Hookup. Etc. You must also have a basic knowledge of engine mechanics, IP's, Glow Plugs, Starters, Fuel Pump's, Etc. I myself am always learning something new when I work on these Generators constantly, that's what makes it fun, the challenge. But when I get stuck on something That's when I turn to the Pro's on this site for answers or suggestions, trust me when I say they will bail your butt out when needed. You also have to put time and money into the generators to get them back to safe working order. After the initial cost and recovery of the generator or generators, you can easily say your going to spend average $200.00 just for Misc. for each generator. The supplies needed before you can even think about the startup. Batteries, fluids, filters, Parts If needed. As all of us know, parts are not cheap even used parts are not cheap for these. First thing I always do Is turn motor buy hand to make sure it's not locked up. Then there's the time it take's to get one ready to start, I would say It takes me average 2 day's checking the generator out, Cleaning pump filters, flushing fuel lines, replacing missing parts, check all wiring to see if they have been messed with and retighten all connections as I go. Replace all air, fuel, oil filters then refill all fluid's to correct levels. Then when I am ready to start the generator, I give the please work prayer then go from there. It can take day's sometimes to diagnose something that is wrong. There Is a lot of stuff I left out or I could have wrote a book on, but I hate typing. I always tell myself that this Hobby of mine Is Fun. P.S. Never Assume Anything.
    1990 M116A2 M103A2
    1985 M1009
    1991 M101A2


  12. The Following 2 Users Say Thank You to GREENMV For This Useful Post:

    dav5 (04-11-2017), Guyfang (08-30-2019)

  13. #149
    Sergeant
    Join Date
    Jun 2018
    Location
    Florida
    Posts
    96
    Thanks
    6
    Thanked 17 Times in 12 Posts

    Default

    Quote Originally Posted by jamawieb View Post
    Yes, I've actually bypassed the breaker by hooking the main wires together on the back of the breaker. Then I put an ordinary 50 amp house breaker inline of my load. It has worked well thus far but would not recommend this to anyone because I have a lot of experience with these generators and would hate someone to ruin their genset by bypassing safety features.
    You did this on an mep 002? Is it in three phase or single phase mode? I have an 002 with a fresh rebuilt engine and the breaker trips at a very low load of 8 amps.
    I only need single phase for my application. So can I switch it to single phase and tie the wires together in the back of the breaker and run a 50amp breaker after the wires leave the generator? Thanks for any info. Phil

  14. #150
    Sergeant
    Join Date
    Jun 2018
    Location
    Florida
    Posts
    96
    Thanks
    6
    Thanked 17 Times in 12 Posts

    Default

    Quote Originally Posted by Guyfang View Post
    It maybe not the ONLY reason, but your right, everyone should look. The same thing happened to me with a 60 KW. It was mounted on a large ROWPU. I turned it on, turned on the main circuit breaker for the ROWPU, and all was well. Then a very large pump kicked on, the gen set went into high speed, trying to correct itself for an extremely large load, and then shut down for overload. You would have thought the set was going to jump off the trailer! I figured the load out in KW, and it came to 35 KW. How can it go into overload shutdown? About 3 days later, it dawned on me to check the CT's. I didnt say a word. Changed i,t and slunk out of town.
    Pls excuse my ignorance but what is the CT?
    Iím trying to get one of my 002s to carry the max load and my breakernis tripping at only 7/8amps. Thx guys.

Page 15 of 16 FirstFirst ... 5 11 12 13 14 15 16 LastLast

Similar Threads

  1. Mep 002a, 003a automatic starting
    By bmwsyc in forum Generators
    Replies: 15
    Last Post: 01-11-2015, 23:42
  2. Mep 002a and mep 003a test runs
    By JAYHAWK 1962 in forum Generators
    Replies: 26
    Last Post: 07-31-2010, 14:02
  3. Muffler for MEP 002a
    By Buckeye Mike in forum Generators
    Replies: 10
    Last Post: 06-14-2010, 10:49
  4. 002 vs 002a and 003 vs 003a GenSets
    By joesco in forum Generators
    Replies: 19
    Last Post: 03-03-2010, 19:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •