• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

clutch adjustmentON M151a2

Lindsaym151

Member
666
12
18
Location
Eustis,FL.
I have about an inch of free play on my clutch pedal and then i start to feel spring resistence , is this normal for the a2?
I have adjusted the linkage out to only two or three threads be hind the nut on the pivot arm for the throw out bearing.
Engine was just in stalled and has not been started yet.
Thanks in advance!
Lindsay
 

poppop

Well-known member
2,316
39
48
Location
Brooklet, Ga
Thats OK but it could be a little more. As long as it does'nt contact the release bearing its alright just be watchfull for any changes. It could change a little when everything heats up.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks