daveiaff
Member
- 63
- 11
- 8
- Location
- Pittsburgh, PA
Searched SS before I posted. Didn't see anything about subject. I got a 24V Secure Wireless RF Remote Control Relay Switch to control the in and out solenoids of the winch. They are dry contact relays on this unit, so you also have to get power to relays. I will post a diagram of the wiring soon, but it does work. I was concerned about the amp draw to activate relays, this unit will handle 10A at 14v, didn't have specs for amps at 24v. I am now looking for the end of cannon plug "?" that is on the end of wired remote so I can hardwire the control box to it and disconnect when not needed. Thanks![71NMLL1RMGL._SL1500_.jpg 71NMLL1RMGL._SL1500_.jpg](https://www.steelsoldiers.com/data/attachments/532/532132-87a509617543543b4f71452f2c7e516c.jpg)
![71NMLL1RMGL._SL1500_.jpg 71NMLL1RMGL._SL1500_.jpg](https://www.steelsoldiers.com/data/attachments/532/532132-87a509617543543b4f71452f2c7e516c.jpg)
Last edited: