technoid
Member
- 69
- 14
- 8
- Location
- Middlebury center, PA
Where can I buy parts for the engine? I have a leaking fuel return line. Leaks right at the crimped end that connects to the main return tube.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP 803a parts?
- Thread starter technoid
- Start date
- 2,530
- 2,055
- 113
- Location
- Efland, NC
Have you read through this thread? Many of your answers should be there:
https://www.steelsoldiers.com/showthread.php?186068-MEP-802A-MEP-803A-Filters-and-Parts
https://www.steelsoldiers.com/showthread.php?186068-MEP-802A-MEP-803A-Filters-and-Parts
Bmxenbrett
Member
- 602
- 30
- 18
- Location
- NY
You should beable to just replace that rubber section with fuel hose. Cut the crimped ferrel off and hose clamp it.
technoid
Member
- 69
- 14
- 8
- Location
- Middlebury center, PA
Thank you!
- 3,806
- 5,870
- 113
- Location
- MA
Yes you can use Gates hose from O reillys or similar. Right off the shelf, with hose clamps for the primary fuel lines, and zip ties for the return line. The "t"s in the return line are 1/8" plastic vacuum tees, should you have any that break.
technoid
Member
- 69
- 14
- 8
- Location
- Middlebury center, PA
Thankyou. I notice when i load the unit to 60 percent the return line stops leaking. I guess the more demand the less return fuel pressure and flow.