• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Resurrecting 816

Redpawn

Active member
146
28
28
Location
St.Cloud FL
kubotaman The TM calls it a VS governor. I spoke with a guy at a local injector shop and he said the pump is considered a dual governor pump and that the second governor can't be added to a single governor pump.
 
Last edited:

Redpawn

Active member
146
28
28
Location
St.Cloud FL
Well thanks to a little side work and a fellow Steel Soldiers member it looks like I might have this running a lot sooner than I thought. Big thanks to Floridanson for hooking me up with the missing radiator, fan and master cylinder. The injector shop I went to is building me the pump I need for the truck as well. A few more weeks and I might get to hear it run. I fixed the tank switching valve and got filterers so I can service it before I start it. Just need to order belts and radiator hoses. Again BIG thanks Floridanson.
 

Redpawn

Active member
146
28
28
Location
St.Cloud FL
While I was repairing the tank switching valve I decided to make a new plate for it. I probably could have just got a new one but now I have a stainless steel one.

IMG_20191129_184354.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks