1009 slave jumping

[rfischba1]

What are the proceedures for jumping a M1009 with slave cables from a M35, is this a two person operation, or can one man do the job.
Thanks

 

[Crash_AF]

It's a one person job. Hook the slave cables up to the individual trucks, start the 1009, disconnect the cables.

Later,
Joe

 

[rfischba1]

Sounds like a plan, thanks

 

[CCATLETT1984]

of course you want to have the m35 running before trying to start the cucv, and leaving the cables attached for a long time wont be good for the batteries.

 

[crusty]

of course you also want to make sure there are no modifications that would affect the jump start operation.

 

[jwaller]

and you want to be sure both trucks have the same connectors. lots of the 1009's were nato plugs and the M35's were 2 prong. adaptors can be had to make it work.