• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

10530A24 Muti-fuel heater questions

toydiesel01

New member
2
0
0
Location
nh
Looking for parts and looking for some answers, 10530a24 heater, anyone have any parts for these? what fuel are these units running on gas/diesel/kero ?I have cleaned the valve and installed a new wick, starts but will not stay running.

any help or advise
Thanks

Bob F
 

toydiesel01

New member
2
0
0
Location
nh
Thank you MWMULES, I bought this one at a yard sale so I don't know what it came out of. The restrictor plate has 3 holes 1 is .045" the other 2 holes are .011"each. These seem a little small to push diesel through. I have tried 2 different pump pressures, the last pump puts out from 10lbs to 14lbs. Stayed running for maybe 2 1/2 minutes on high on the bench, seems like it runs out of fuel and shuts down. Exhaust stops smoking. Could this be set up to be a gas burner and I am trying to run it on diesel?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks