419 primary fuel filter

Kolge

New member
1
0
1
Location
Montana
New here folks so please bare with me. Have an 89 flu419 unimog. I'm trying to replace the primary fuel filters located under the hood on the passenger side. These cannisters are on there very tight to the point im afraid im going to break something. They turn about a quarter of an inch. I opened up the nuts on the top thinking it might be a pressure issue but not much fuel came out. I than primed the system bleed and started the vehicle with the old filters in place. Any info would be greatly appreciated
 

Speedwoble

Active member
571
220
43
Location
New Holland, PA
New here folks so please bare with me. Have an 89 flu419 unimog. I'm trying to replace the primary fuel filters located under the hood on the passenger side. These cannisters are on there very tight to the point im afraid im going to break something. They turn about a quarter of an inch. I opened up the nuts on the top thinking it might be a pressure issue but not much fuel came out. I than primed the system bleed and started the vehicle with the old filters in place. Any info would be greatly appreciated
Have you read the service manual instructions? If not, I suggest checking them out . You can download the TM’s on this site.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks