• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M-135 wheel bearing adjustment and brg cup seating

Tony

New member
141
1
0
Location
Camarillo, Calif 93012
when I removed the wheel bearing, someone used a chisel to tighten them . I'm sure that there must be a wrench for this nut,so it can be torqued properly. where can I buy one?
Also the manual uses a replacer to seat the bearing cup, would like to buy, but if I can't, and I make one, what material should I use and what should the OD be?
 

Attachments

Santoken

New member
7
0
0
Yeah, seems that the manuals indicate there is a remover/replacer for everything on these trucks. For the wheel bearing nut, I just made a sheet-metal socket, works like a charm. As far as the bearing race, I just set mine with a punch.
 

gusce

New member
6
0
0
Someplace I read that the standard Army tool for wheel bearings was a cold chisel and from the looks of my M35A2 and M135 I believe it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks