• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

800 series 5 ton axle vs 900 series

Beerslayer

Well-known member
Steel Soldiers Supporter
1,054
53
48
Location
Tualatin, Oregon
So basically 900's will be just fine as long as I dont panic brake or drive like a male donkey?

As others ^^ said, the air brakes in the 900 series trucks are fine, the primary cause of accidents is driver ~inexperience/error.

The 50 MPH speed rating on the big tires is for when they are fully loaded. At that point heat becomes an issue. You can't get enough weight on a deuce or 923 with 395s, 1400s, or 1600s for heat to become an issue.

So really it comes down to physics + driver ability and training.

70 MPH down a straight, dry, empty road, perfectly safe. Factor in corners, slippery surfaces, other vehicles and donkey carts and drunks lying in the road? 40 MPH looks a lot better.

Those brakes need to stop the truck fully loaded or unloaded, and they do that. The grey matter controlling that right foot on the brake or accelerator has to do it's job properly too.

Any farm kid with experience hauling potatoes, hay, or grain can jump behind the wheel of these trucks and operate them safely. We just aren't turning out many of those anymore.

All it takes is a driver operating in a professional manner.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks