All metal bows???

[Rhino 5/4]

I did not have a tape to measure and the deuce bows I am familliar with are metal and wood but I found these piled up at the green acres. Anyone seen thes berfore and possilby a deuce or 5 ton variation, trailer bows are narrower and LMTV are round?

 

[SCSG-G4]

They may be for the 105 trailers. I know the generator trailers that had MEP-002's and -003's had all metal bows on them. I still have one of them - with two MEP-003A's on it.

 

[m715mike]

Those look like HEMTT bows.

Uprights and Bows - What do I have?

I was told that these uprights and bows were for a Deuce when I acquired them. But after trying them yesterday, I now think otherwise. What are these uprights and bows intended for? The uprights are metal and measure 55” from the bottom to the bow. This causes the cargo cover to sit about 12”...

www.steelsoldiers.com

 

[Rhino 5/4]

Those look like HEMTT bows.

Uprights and Bows - What do I have?

I was told that these uprights and bows were for a Deuce when I acquired them. But after trying them yesterday, I now think otherwise. What are these uprights and bows intended for? The uprights are metal and measure 55” from the bottom to the bow. This causes the cargo cover to sit about 12”...

www.steelsoldiers.com

I believe you are correct. Well, there is a pile of them if anyone is looking for some.

 

[m715mike]

@fuzzytoaster

 

[fuzzytoaster]

Yup, single piece with an arch in the middle = HEMTT bows.

 

[HDN]

Now I want to see a picture of a HEMTT with a cargo cover on it - not something I've seen very often!